Frequently Asked Questions
In most cases installation can be completed in 30-40 minutes.
Disruption is minimal as no power cabling is required. It may be possible to allow use of the cubicles.
Only one valve can be operated by a single Water Watch. However, the valve can be placed in the water-pipe supplying 2 or 3 cisterns. The installed can arrange for the valve to open long enough to fill all the cisterns during a flush cycle.
Most installations of this nature require some preventative maintenance. This is low with the Water Watch.
The valve has a stainless steel filter to trap debris in the water supply that can be checked annually (see the Maintenance section for instructions).
The batteries should be changed as a matter of course, every 5 or so years or when the battery low indicator flashes.
