Wide-angle PIR sensor manufactured by Marnic Technology. Very popular with schools and local authority sites as well as pubs, offices and factories.
Can be calibrated to flush up to 4 times per hour but we recommend that it is set to flush 20 minutes after the sensor detects a user, therefore a maximum of 3 times per hour. If no user is detected (e.g. over weekends), there is a choice of flushing after 12 or 24 hours.
The solenoid can be installed on either vertical or horizontal pipe. An arrow on the brass body indicates the direction of flow.
Includes:
- Flush controller box with sensor eye for wall or ceiling mount above the urinals
- Marnic WMV1090P Solenoid valve for fitting to water supply (15mm compression fit)
- 4.5v alkaline Duracell battery with lead and connector
Features include:
- Slim, sleek, click-fit design
- High quality polycarbonate case
- Cable channels and clamp
- Easy, quick installation
- Easy wipe-clean finish
- Easy to maintain
- Small and unobtrusive, our vandal-resistant design is unlikely to attract any unwanted attention
- Wide-angle PIR detector with multizone Fresnel lens for maximum range detection
- Exceptionally long battery life. Ultra-low power consumption means complete safety and batteries that last for years
- Microprocessor-based design and quartz crystal clock-control provide optimal reliability
- Dramatically cuts water costs whilst maintaining high levels of hygiene. Product payback within a matter of months.























